HP 3PAR Policy Manager Software - Manual (Page 31)

4.15 Understanding the Policy Advisor Analysis Process
3PAR Policy Advisor User’s Guide
tunevv usr_cpg c2 cpvv1
---------------------------
Split CPG Analysis
---------------------------
*****************************************************************
** The following VV is split between CPGs. This can happen if
** a tune command is currently executing, or a tune is cancelled
** or fails in the middle of a tune.
**
** VVs split between CPGs are not analyzed by the Policy Advisor.
**
** The primary CPG is prefixed by an asterisk (*)
*****************************************************************
VV cpvv1 is being tuned - USR space is in CPGs: *c2 c1
4.6.2.4 Active Tuning Operations
Only one tuning operation at a time can occur on a virtual volume. If a tuning operation is
running then that volume is not considered for analysis by the Policy Advisor until the tuning
operation completes.
Sample output from an InServ Storage Server with virtual volumes that are part of an active
tuning operation is shown in the following example:
./PolicyAdvisor.tcl
---------------------------
Active Tune analysis
---------------------------
***************************************************************
** There is 1 active/pending tune on Target InServ
**
** VVs indicated below will not be considered for optimization
** until these tunes complete:
**
***************************************************************
VVName TuneType TaskId Status -------StartTime-------
v1 tune_vv 1093 active 2010-01-14 07:16:25 PST