HP LaserJet Enterprise 700 Printer M712 series - Manual (Page 121)

6. Select the first field to open a keypad. Enter the correct digits for the field, and then press the OK
button.
7. Repeat the process for each field, and then press the OK button.
Manually configure IPv6 TCP/IP parameters from the control panel
Use the control-panel Administration menus to manually set an IPv6 address.
1. On the product control panel, press the Home button.
2. To enable manual configuration, open the following menus:
● Administration
● Network Settings
● Jetdirect Menu
● TCP/IP
● IPV6 Settings
● Address
● Manual Settings
● Enable
Select the On option, and then press the OK button.
3. Select the Address option, and then press the OK button to open a keypad.
4. Use the keypad to enter the address.
5. Press the OK button.
ENWW Configure IP network settings 111