HP LaserJet Enterprise 700 Printer M712 series - Manual (Page 27)

Connect the product to a network by using a
network cable and install the software (Mac OS X)
Configure the IP address
1. Make sure the product is turned on and that the Ready message displays on the product control-
panel display.
2. Connect the network cable to the product and to the network.
3. Wait for 60 seconds before continuing. During this time, the network recognizes the product and
assigns an IP address or host name for the product.
4. To identify the product IP address or host name, on the product control panel press the Home
button, open the How to Connect menu, and select the Network Address option.
You can also find the IP address or host name by printing a configuration page.
a. On the product control panel, press the Home button.
b. Open the following menus:
● Administration
● Reports
● Configuration/Status Pages
c. Select the Configuration Page option.
d. Scroll up to the Print option, and then press the OK button.
ENWW Connect the product to a network by using a network cable and install the software (Mac OS X) 17