HP LaserJet Enterprise 700 Printer M712 series - Manual (Page 131)

● Energy Settings
● Sleep Timer Settings
3. Open the Sleep Mode/Auto Off After menu, and then use the keypad to set the appropriate
time. Press the OK button.
4. Open the Sleep Mode/Auto Off Timer menu, and select the Enabled option. Press the OK
button.
NOTE: The sleep-mode default time is 45 minutes.
NOTE: When the product is in sleep mode, the power-button light flashes.
Set the sleep schedule
NOTE: You must configure the date and time settings before you can use the Sleep Schedule
feature.
1. On the product control panel, press the Home button.
2. Open the following menus:
● Administration
● General Settings
● Date/Time Settings
3. Open the Date/Time Format menu and configure the following settings:
● Date Format
● Time Format
4. To save the changes, press the OK button.
5. Open the Date/Time menu and configure the following settings:
● Date
● Time
● Time Zone
If you are in an area that uses daylight savings time, select the Adjust for Daylight Savings
box.
6. To save the changes, press the OK button.
7. Press the back-arrow button to return to the Administration screen.
ENWW Economy settings 121