HP USB Dual Output USB Graphics Adapter - Manual (Page 23)

B Technical Specifications
NOTE: All performance specifications are provided by the component manufacturers. Performance
specifications represent the highest specification of all HP's component manufacturers' typical level
specifications for performance and actual performance may vary either higher or lower.
HP Dual Output USB Graphics Adapter
Host Interface USB 3.0 (backward compatible to USB
2.0); USB cable included
Video Interface DisplayPort; DVI-I or VGA
Connectors Video output: 1) DisplayPort and 2) DVI-I 24pin + 5pin Female Connector or VGA
HDDE 15pin Female Connector
Host upstream link: USB 3.0 Micro B Connector
Connectivity Up to 6 monitors can be supported with 3 adapters on a computer
RAM 8M x 16 DDR Synchronous DRAM (SDRAM)
Power Mode Bus-powered
Operating System Support Refer to System Requirements on page 3
Supported Modes Extend (Default), Mirror, Primary Display
Resolutions, Refresh Rate, and
Color Depth Refer to Adjusting Resolution, Color Depth and Refresh Rate on page 10
Housing Plastic
Dimensions 9.45 (L) x 8.14 (W) x 2.01 (H) cm 3.72 (L) x 3.2 (W) x .79 (H) inches
USB Cable USB 3.0 Y cable, 1.8m (6 ft)
Operating Temperature 0-40°C 32-104°F
Storage Temperature -10~+70°C 14~+158°F
Operating Humidity 20% to 80%
Non-Operating Humidity 5% to 95%
EMC ● FCC Part 15 Class B, IC ICES-003
● CE (EN55022, EN61000, EN55024)
Agency Approvals FCC, CE, VCCI, KC, C-Tick, UL
RoHS RoHS compliant
HP Dual Output USB Graphics Adapter 17