HP USB Dual Output USB Graphics Adapter - Manual (Page 9)

Features
● Supports DisplayPort and DVI or VGA graphics output
● Supports USB 3.0 and USB 2.0 input
● DisplayPort output supports resolutions up to 2560 x 1600; DVI and VGA output supports
resolutions up to 1920 x 1200 or 2048 x 1152
● Up to 6 monitors can be supported with 3 adapters on a computer
● Plug & Play after one-time driver installation
● Hot-plug; add or remove monitor without system reboot
● Microsoft Windows XP, Windows Vista, and Windows 7 compatible
● Resumes from hibernation and suspend modes
NOTE: In certain modes, when trying to display full screen movies from a DVD, it may not display
on the add-on monitor.
Package Contents
Before installation, check the items in the package. The package should contain the following items:
● HP Dual Output USB Graphics Adapter
● USB 3.0 Y Cable
● DVI to VGA Adapter
● Driver and Documentation CD
● Quick Installation Guide
System Requirements
The software for the HP Dual Output USB Graphics Adapter can be installed on any system running
one of the following operating systems:
● Windows XP SP3 (32-bit edition only)
● Windows Vista SP1 (32-bit or 64-bit editions)
● Windows Vista SP2 (32-bit or 64-bit editions)
● Microsoft Windows 7 SP1 (32-bit or 64-bit)
Refer to the following sections for typical system requirements for your operating system.
Windows 7 and Windows Vista Systems
For Windows 7 and Windows Vista, the Windows Experience Index (WEI) is a useful measure of
hardware level. The WEI is accessible from Computer > Properties or from Control Panel >
System.
The recommended typical hardware requirements for the computer are:
● WEI score of at least 3 in the “Graphics; Desktop performance for Windows Aero” category
● WEI score of at least 3 as recommended by Microsoft
Features 3