HP Integrity NonStop J-Series - Manual (Page 4)

Contents
M8609A Tabletop Tape Drive Installation and User’s Guide— 546013-002
ii
A. Specifications
Taking Care of Cartridges 4-5
Operating and Storage Environment 4-5
Cartridge Is Jammed 4-6
The Tape Drive Will Not Accept a Cartridge (or Ejects It Immediately) 4-6
A. Specifications
Tape Drive Components Weights A-1
Power A-2
Technical Specifications A-2
Fiber Cables A-3
Cartridge Specifications A-4
B. Configuring the Tape Drive for the NonStop BladeSystem
Server
Configuration Overview B-1
Adding the Tape Drive B-1
Start the Tape Drive B-2
Verify the Tape Configuration B-2
Troubleshoot the Tape Configuration B-3
Safety and Compliance
Index
Examples
Figures
Figure 1-1. Hardware Configuration 1-1
Figure 2-1. Front View of Tape Drive 2-1
Figure 2-2. LC-LC Fiber-Optic Cable 2-2
Figure 2-3. Rear Components of Tape Drive 2-3
Figure 2-4. View of Two FCSAs at Rear of Server 2-4
Figure 3-1. Inserting a Tape Cartridge 3-1
Figure 3-2. Unloading a Tape Drive 3-2
Figure 3-3. Tape Drive Controls and Indicators 3-3
Figure 3-4. Ultrium Cartridge Components 3-7
Figure 3-5. LTO Cartridge Labels 3-9
Figure 3-6. Ultrium Cartridge Label 3-10
Figure 3-7. Write Protect Switch 3-11
Figure 4-1. Tape Drive LEDs 4-1
Figure A-1. Tape Drive Dimensions A-1