HP ProLiant SL210t Gen8 Server - Manual (Page 23)

Operations 23
5. Remove the 2U adapter board bracket.
Install the 2U adapter board bracket
1. Install the 2U adapter board bracket.
2. Install the node into the chassis (" Installing a node into the chassis " on page 30 ).
3. Connect all peripheral cables to the node.
4. Power up the node (" Power up the nodes " on page 17 ).
Remove the Mini-SAS cable
1. Power down the node (on page 17 ).
2. Disconnect all peripheral cables from the node.
3. Remove the node from the chassis (on page 17 ).