Bluetooth receiver components – HP Bluetooth Pendant Headphones User Manual
Page 10
Bluetooth receiver components
Component
Description
(1)
Mini-USB port
Connects a mini-USB cable to charge the receiver.
(2)
Audio-out (headphone) jack
Connects the audio line-in cable.
(3)
Volume up button
Increases headphone volume.
(4)
Next/fast forward button
Plays the next track of a CD or the next chapter of a DVD.
NOTE:
This button only works when connected to a Bluetooth-enabled
computer.
(5)
Charging light
●
Red: The receiver is charging.
●
Blinking red: The battery is low.
●
Off: The battery is fully charged.
(6)
Volume down button
Decreases headphone volume.
(7)
Receiver status light
●
A blinking blue light can indicate any one of the following states:
◦
Power: The receiver is turned on and the light blinks fast 3 times.
◦
Standby mode: After the receiver is turned on, the headphones
go into standby mode and the light blinks slowly until the
headphones are successfully paired with the audio device.
6
Chapter 2 Identifying components