HP Bluetooth Pendant Headphones User Manual
Page 24
Advertising
4.
Plug the other end of the audio line-in cable into the auxiliary jack to an audio host (2), such as a
car auxiliary port, stereo receiver, or speakers.
NOTE:
Certain audio devices may need their interface switched to AUX mode or Line-in mode.
This will switch the audio source and allow you to play music through the auxiliary jack.
5.
Press and hold the multifunction button (1) on the Bluetooth audio adapter for 3 seconds to turn
on the adapter and begin pairing.
A blinking blue adapter status light (2) indicates that the adapter is turned on and pairing.
20
Chapter 6 Using the audio line-in cable with other audio devices (select models only)
Advertising