HP Bluetooth Pendant Headphones - Manual (Page 9)

Bluetooth audio adapter components (select models only)
Component Description
(1) Adapter status light A blinking blue light can indicate any one of the following power states:
● Power: The audio adapter is turned on and the light blinks fast 3 times.
● Standby mode: After the audio adapter is turned on, the headphones
go into standby mode and the light blinks slowly until the headphones
are successfully paired with the audio device.
● Pairing: After you press and hold the multifunction button for
3 seconds, the light blinks faster until the headphones successfully
pair with the audio device.
● Paired: After the headphones successfully pair with the audio device,
the light blinks slowly.
A red light indicates one of the following charging states:
● Red: The audio adapter is charging.
● Blinking red: The battery is low.
● Off: The audio adapter is fully charged.
(2) Multifunction button ● When the audio adapter is off, press and hold the button for 3 seconds
to turn on the audio adapter and begin pairing.
● When the audio adapter is on, press and hold the button for 3 seconds
to turn off the audio adapter and deactivate Bluetooth.
NOTE: The audio adapter beeps to indicate that it is turned on and paired
with an audio device.
(3) Audio-out (headphone) connector Connects the Bluetooth audio adapter to the audio-out (headphone) jack.
(4) Mini-USB port Connects a mini-USB cable to charge the audio adapter.
Bluetooth audio adapter components (select models only) 5