HP Bluetooth Pendant Headphones - Manual (Page 11)

◦ Pairing: After you press and hold the multifunction button for
3 seconds, the light blinks faster until the headphones
successfully pair with the audio device.
◦ Paired: When the headphones successfully pair with the audio
device, the light blinks slowly.
● Off: The receiver is off and Bluetooth is deactivated.
(8) Previous/rewind button Plays the previous track of a CD or the previous chapter of a DVD.
NOTE: This button only works when connected to a Bluetooth-enabled
computer.
(9) Multifunction button ● When the receiver is off, press and hold the button for 3 seconds to
turn on the receiver and begin pairing.
● When the receiver is on and connected to a Bluetooth-enabled
computer, briefly press the button to play or pause audio.
● When the receiver is on and connected to an audio device, briefly
press the button to mute or restore the sound.
● When the receiver is on, press and hold the button for 3 seconds to
turn off the receiver and deactivate Bluetooth.
Bluetooth receiver components 7