HP Deskjet D4363 Printer - Manual (Page 107)

Fading occurs near the edges of a photo
If fading occurs approximately 25 to 63 mm (1.0 to 2.5 inches) from the edge of a photo,
try the following solutions:
•
Install a photo print cartridge and a tri-color print cartridge in the printer.
• Use maximum dpi mode to print the photo. For more information, see Maximum dpi .
Problems with borderless documents
• Borderless printing guidelines
• Image is printed at an angle
• Part of the photo is faded
• Photo has an unwanted border
Borderless printing guidelines
When printing borderless photos or brochures, follow these guidelines:
•
Verify that the paper size that is specified in the Paper Size drop-down list on the
Printing Shortcuts tab matches the size of the paper that is loaded in the paper tray.
• Select the appropriate paper type in the Paper Type drop-down list on the Printing
Shortcuts tab.
• If printing in grayscale, select High Quality under Print in Grayscale on the Color
tab.
• Do not print borderless documents in ink-backup mode. Always have two print
cartridges installed in the printer when printing borderless documents.
For more information, see
Ink-backup mode .
Chapter 12
104 Troubleshooting
T
roub
les
hoot
ing