HP Deskjet D4363 Printer - Manual (Page 114)

Ink is not filling the text or graphics completely
Try the following solutions if the ink is not filling the text or image completely so that it
appears that parts are missing or blank.
• Solution 1: HP recommends using genuine HP print cartridges
• Solution 2: Check the print settings
• Solution 3: Check the paper type
• Solution 4: Clean the print cartridges
Solution 1: HP recommends using genuine HP print cartridges
Solution: Check to see if your print cartridges are genuine HP print cartridges.
HP recommends that you use genuine HP print cartridges. Genuine HP print
cartridges are designed and tested with HP printers to help you easily produce great
results, time after time.
NOTE: HP cannot guarantee the quality or reliability of non-HP supplies. Printer
service or repairs required as a result of using a non-HP supply will not be covered
under warranty.
If you believe you purchased genuine HP print cartridges, go to:
www.hp.com/go/anticounterfeit
Cause: Non-HP ink was being used.
If this did not solve the issue, try the next solution.
Solution 2: Check the print settings
Solution: Check the print settings.
•
Check the paper type setting to make sure it matches the type of paper loaded in
the input tray.
• Check the quality setting. Use a higher quality setting to increase the amount of
ink used for printing.
For more information, see:
•
Select a paper type
• Change the print speed or quality
• Maximum dpi
Cause: The paper type or print quality settings were incorrectly.
If this did not solve the issue, try the next solution.
Solution 3: Check the paper type
Solution: HP recommends that you use HP Premium Papers or any other paper
type that is appropriate for the product.
Print quality is poor 111
Trou
bles
ho
ot
ing