HP Deskjet D4363 Printer - Manual (Page 29)

• Open the file in a software program such as HP Photosmart Software and resize the
photo. Ensure that the size corresponds to the paper size that you want to use.
• For maximum fade resistance, use HP Premium Plus Photo Paper.
• Verify that the photo paper that you are using is flat. For information about preventing
photo paper from curling, see the
photo paper storage instructions .
• Do not exceed the input tray capacity: 30 sheets of photo paper.
Prepare to print
1. Raise the output tray.
2. Slide the paper guide all the way to the left.
3. Verify that the photo paper is flat.
4. Place the photo paper in the right side of the input tray. The side to be printed on
should face down and the short edge should point towards the printer.
5. Push the paper into the printer until it stops.
6. Slide the paper guide firmly against the edge of the paper.
1 Small photos
2 Large photos
7. Lower the output tray.
Print
NOTE: If your software program includes a photo printing feature, follow the
instructions that are provided with the software program. Otherwise, follow these
instructions.
Chapter 6
26 Print photos
Prin
t p
hot
os