HP ProLiant BL685c Server-Blade - Manual (Page 33)

Hardware options installation 33
6. Install the DIMM.
7. Install the DIMM baffle (on page 15 ).
8. Install the access panel (on page 15 ).
9. Install the server blade (" Installing a server blade " on page 18 ).
Mezzanine card option
Optional mezzanine cards enable network connectivity and provide Fibre Channel support. For
mezzanine card locations, see "System board components (on page 9 )."
For mezzanine card signal mapping, see the HP ProLiant BL685c Server Blade Installation Instructions that
ship with the server blade.
Optional mezzanine cards are classified as Type I mezzanine cards and Type II mezzanine cards. The
card type determines where it can be installed in the server blade:
• Install Type I mezzanine cards on any mezzanine connector.
• Install Type II mezzanine cards only on Mezzanine 2 connector or Mezzanine 3 connector.
To install the component:
1. Power down the server blade (on page 13 ).
2. Remove the server blade (on page 14 ).
3. Remove the access panel (on page 14 ).