Enww control-panel messages 173 – HP Color LaserJet CP3520 Printer Series User Manual
Page 185
Control panel message
Description
Recommended action
68.X STORAGE ERROR SETTINGS
CHANGED
To continue press OK
One or more product settings are invalid and
have been reset to the factory-default
settings. Printing can continue, but some
unexpected functions might occur if an error
occurred in permanent storage.
Press the
OK
button to clear the message. If
the message is not cleared, turn the product
off, and then turn the product on.
If this message persists, contact an HP-
authorized service or support provider. (See
the HP Support flyer, or go
.)
69.X ERROR
To continue turn off then on
A temporary printing error occurred.
Turn the product off, and then turn the
product on.
If this message persists, contact an HP-
authorized service or support provider. (See
the HP Support flyer, or go
.)
79.XXXX ERROR
To continue turn off then on
An internal product error has occurred.
Turn the product off and then on.
If the message persists, contact HP support.
See
.
8X.YYYY EIO ERROR
This message appears in English only. It
indicates that the EIO card in slot X has failed.
Replace the EIO card.
8X.YYYY EMBEDDED JETDIRECT ERROR This message appears in English only. It
indicates that the embedded HP Jetdirect
card has failed.
Contact HP support. See
.
Access denied MENUS LOCKED
The control-panel menu that you tried to
select is currently locked.
Consult with the person who administers the
product.
Action not currently available for tray x
Tray size cannot be ANY SIZE/ANY
CUSTOM
Duplex registration is not available when the
size is set to ANY SIZE or ANY CUSTOM.
Configure the tray to a specific size, and then
set the registration for that tray.
BAD OPTIONAL TRAY CONNECTION
The optional tray is not connected.
1.
Turn the product off.
2.
Remove and then reinstall the optional
tray.
If the error persists, contact an HP-authorized
service or support provider. See the
HP support flyer, or go to
Calibrating...
Displays during calibration.
No action is necessary.
CALIBRATION RESET PENDING
Processing...
A calibration reset will occur when all jobs are
processed.
To begin the reset sooner, cancel all jobs by
pressing the Stop button
.
Canceling...
The product is canceling the current job.
No action is necessary.
CARD SLOT <X> NOT FUNCTIONAL
The compact flash card in slot <X> is not
working correctly.
Remove the card from the slot indicated, and
replace with a new card.
CARD SLOT DEVICE FAILURE
To clear press OK
The specified device has failed.
Press the
OK
button to clear.
CARD SLOT FILE OPERATION FAILED
To clear press OK
A PJL file system command attempted to
perform an illogical operation.
Press the
OK
button to clear.
Table 11-1
Control-panel messages (continued)
ENWW
Control-panel messages 173