HP Color LaserJet CP3520 Printer Series - Manual (Page 189)

Control panel message Description Recommended action
4. Confirm that the paper guides are in the
correct position.
5. To use another tray, remove paper from
the tray and then press the
OK button.
LOAD TRAY 3 [TYPE] [SIZE]
Media insert required in tray
To use another tray press OK
This message appears when printing 4 x 6 in
or 100 x 150 mm size paper, which requires
the HP postcard media insert in Tray 3. Install the HP postcard media insert in Tray 3,
and load the requested paper.
LOAD TRAY <X> [TYPE] [SIZE] This message appears when the indicated
tray is selected but is not loaded, and no other
paper trays are available for use. Load the tray with requested paper and then
press the
OK button to continue.
LOAD TRAY <X> [TYPE] [SIZE]
To use another tray press OK
This message appears when the indicated
tray is selected but is not loaded, and other
paper trays are available for use. 1. Load the correct paper in the tray.
2. If prompted, confirm the size and type of
paper loaded.
3. Otherwise, press the OK button to select
another tray.
LOADING PROGRAM <XX>
Do not power off
Programs and fonts can be stored on the
product’s file system and are loaded into
RAM when the product is turned on. The
number XX specifies a sequence number
indicating the current program being loaded. No action necessary. Do not turn the product
off.
MANUALLY FEED <TYPE> <SIZE> This message appears when Tray 1 is
selected but is not loaded, and other paper
trays are available for use. Load tray with requested paper. If paper is
already in tray, press the help button to exit
message and then press the
OK button to
print. To use another tray, clear paper from
Tray 1, press the help button to exit the
message and then press the
OK button.
MANUALLY FEED <TYPE> <SIZE>
To continue press OK
This message appears when Tray 1 is
selected but is not loaded, and other paper
trays are available for use. Load tray with requested paper.
To override the message, press the OK
button to use a type and size of paper that is
available in another tray.
MANUALLY FEED <TYPE> <SIZE>
To use another tray press OK
The specified job requires a manual feed. Load tray with requested paper. If paper is
already in tray, press the help button to exit
the message and then press the
OK button to
print. To use another tray, clear paper from
Tray 1, press the help button to exit the
message and then press the
OK button.
MANUALLY FEED OUTPUT STACK
Then press OK to print second side
The product has printed the first side of a
manual duplex job and is waiting for the user
to insert the output stack to print the second
side. 1. Maintaining the same orientation,
remove document from the output bin.
2. Flip document printed side up.
3. Load document in Tray 1.
4. Press the OK button to print.
MOVING SOLENOID
To exit press
The solenoid is moving as part of a
component test. No action is necessary.
MOVING SOLENOID AND MOTOR The solenoid and a motor are moving as part
of a component test. No action is necessary.
Table 11-1 Control-panel messages (continued)
ENWW Control-panel messages 177