38 chapter 2 control panel enww – HP Color LaserJet CP3520 Printer Series User Manual
Page 50
Item
Sub-item
Sub-item
Values
Description
KEEP: The current 802.1X settings are
maintained.
RESET SECURITY
YES
NO*
Specify whether the current security settings
on the print server will be saved or reset to
factory defaults.
YES: Security settings are reset to factory
defaults.
NO: The current security settings are
maintained.
DIAGNOSTICS
EMBEDDED TESTS
This menu provides tests to help diagnose
network hardware or TCP/IP network
connection problems.
Embedded tests help to identify whether a
network fault is internal or external to the
product. Use an embedded test to check
hardware and communication paths on the
print server. After you select and enable a test
and set the execution time, you must select
EXECUTE to initiate the test.
Depending on the execution time, a selected
test runs continuously until either the product
is turned off, or an error occurs and a
diagnostic page is printed.
LAN HW TEST
YES
NO*
CAUTION:
Running this embedded test will
erase your TCP/IP configuration.
This test performs an internal loopback test.
An internal loopback test will send and
receive packets only on the internal network
hardware. There are no external
transmissions on your network.
Select YES to choose this test, or NO to not
choose it.
HTTP TEST
YES
NO*
This test checks operation of HTTP by
retrieving predefined pages from the product,
and tests the embedded Web server.
Select YES to choose this test, or NO to not
choose it.
SNMP TEST
YES
NO*
This test checks operation of SNMP
communications by accessing predefined
SNMP objects on the product.
Select YES to choose this test, or NO to not
choose it.
DATA PATH TEST
YES
NO*
This test helps to identify data path and
corruption problems on an HP postscript level
3 emulation product. It sends a predefined PS
file to the product, However, the test is
paperless; the file will not print.
Select YES to choose this test, or NO to not
choose it.
Table 2-1
Embedded Jetdirect and EIO <X> Jetdirect menus (continued)
38
Chapter 2 Control panel
ENWW