Document Outline

• HP ProLiant ML350e Gen8 v2 Server User Guide
• Abstract
• Notice
• Contents
• Component identification
  • Front panel components
  • Front panel LEDs and buttons
  • Rear panel components
  • Rear panel LEDs
  • System board components
    • System maintenance switch
    • System board LEDs
    • NMI functionality
    • DIMM slot locations
  • Smart Array SAS RAID controller card components
  • SAS and SATA device numbers
  • SAS and SATA drive LED combinations
  • FBWC module LED definitions
    • P222 and P430 modules
    • B120i module
  • Hot-plug drive LED definitions
  • Fan locations
  • Redundant power supply connectors
• Operations
  • Power up the server
  • Power down the server
  • Unlock the front bezel
  • Lock the front bezel
  • Remove the front bezel
  • Install the front bezel
  • Remove the access panel
  • Install the access panel
  • Remove the PCI air baffle
  • Remove the system air baffle
  • Install the system air baffle
  • Remove the full-length expansion board
  • Remove the fan modules and the fan blank
  • Install the fan modules and the fan blank
• Setup
  • Optional installation services
  • Optimum environment
    • Space and airflow requirements
    • Temperature requirements
    • Power requirements
    • Electrical grounding requirements
  • Server warnings and cautions
  • Identifying tower server shipping carton contents
  • Installing hardware options
  • Setting up a tower server
  • Powering on and selecting boot options
  • Installing the operating system
  • Registering the server
• Hardware options installation
  • Introduction
  • PCI air baffle option
  • Second processor option
  • Memory options
    • HP SmartMemory
    • Memory subsystem architecture
    • Single-rank, dual-rank, and quad-rank DIMMs
    • DIMM identification
  • Memory configurations
  • General DIMM slot population guidelines
    • Advanced ECC memory configuration
    • Online Spare memory configuration
    • Lockstep memory configuration
    • Advanced ECC population guidelines
    • Online spare population
    • Lockstep Memory population guidelines
    • Population order
  • Installing a DIMM
  • Drive options
    • Installing a hot-plug drive
    • Installing a non-hot-plug drive
  • Optical drive option
  • FBWC options
    • Installing the FBWC module and capacitor pack(P222 and P430)
    • Installing the FBWC module and capacitor pack (B120i)
  • Installing an expansion board
  • Eight-bay SFF drive cage option
  • Four-bay LFF drive cage option
  • Redundant hot-plug power supply enablement kit option
  • Smart Array cable option
  • Power supply module
  • HP Trusted Platform Module option
    • Installing the Trusted Platform Module board
    • Retaining the recovery key/password
    • Enabling the Trusted Platform Module
• Cabling
  • Storage cabling
    • Non-hot-plug, four-bay LFF drive cabling
    • Hot-plug, four-bay LFF drive cabling
    • Hot-plug, four-bay + four-bay LFF drive cabling
    • Hot-plug, eight-bay SFF drive cabling
    • Hot-plug, eight-bay + eight-bay SFF drive cabling
  • Power cabling
    • Integrated power cabling
    • RPS power cabling
  • Optical drive cabling
  • Capacitor pack cabling
• Software and configuration utilities
  • Server mode
  • HP product QuickSpecs
  • HP iLO Management Engine
    • HP iLO
      • Active Health System
      • Integrated Management Log
    • Intelligent Provisioning
      • HP Insight Diagnostics
        • HP Insight Diagnostics survey functionality
      • Erase Utility
    • HP Insight Remote Support software
    • HP Insight Online
    • Scripting Toolkit
  • HP Service Pack for ProLiant
    • HP Smart Update Manager
  • HP ROM-Based Setup Utility
    • Using RBSU
    • Auto-configuration process
    • Boot options
    • Configuring AMP modes
    • Re-entering the server serial number and product ID
  • Utilities and features
    • HP Smart Storage Administrator
    • Option ROM Configuration for Arrays
    • ROMPaq utility
    • Automatic Server Recovery
    • USB support
    • Redundant ROM support
      • Safety and security benefits
  • Keeping the system current
    • Drivers
    • Software and firmware
    • Version control
    • HP operating systems and virtualization software support for ProLiant servers
    • HP Technology Service Portfolio
    • Change control and proactive notification
• Troubleshooting
  • Troubleshooting resources
• System battery replacement
• Regulatory information
  • Safety and regulatory compliance
  • Belarus Kazakhstan Russia marking
  • Turkey RoHS material content declaration
  • Ukraine RoHS material content declaration
  • Warranty information
• Electrostatic discharge
  • Preventing electrostatic discharge
  • Grounding methods to prevent electrostatic discharge
• Specifications
  • Environmental specifications
  • Server specifications
  • Power supply specifications
  • Hot-plug power supply calculations
• Support and other resources
  • Before you contact HP
  • HP contact information
  • Customer Self Repair
• Acronyms and abbreviations
• Documentation feedback
• Index