HP Officejet Pro K5400 Printer User Manual
Page 75
Light description/Light pattern
Explanation and
recommended action
The Power light blinks.
The device is turning
on or off, or is
processing a print job.
No action is required.
The device is pausing
for the ink to dry.
Wait for the ink to dry.
The Power light and the Resume light blink.
Print media is jammed
in the device.
Remove all media from
the output tray. Locate
and clear the jam. For
more information, see
.
The device carriage
has stalled.
•
Open the top
cover and remove
any obstructions
(such as jammed
media).
•
Press (Resume
button) to continue
printing.
•
If the error
persists, turn the
device off, and
then on again.
The Power light is on and the Resume light blinks.
The device is out of
paper.
Load paper and press
(Resume button).
The Power light and the Resume light are on.
A cover is not closed
completely.
Make sure all covers
are completely closed.
The rear access panel
or duplex unit is
missing, or is not
inserted completely.
Make sure the rear
access panel or the
duplex unit is inserted
completely at the back
of the device. (These
features are available
with some models.)
(continued)
Interpreting control-panel lights
71