HP Officejet 150 Mobile All-in-One Printer - L511a - Manual (Page 31)

Using the USB port on the back of the printer, you can connect a USB storage device,
or you can connect and print photos from a PictBridge-compatible camera. You can
also transfer files from the storage device to your computer.
CAUTION: Attempting to remove a memory device while it is being accessed can
damage files on the memory device. You can safely remove a memory card only
when the photo light is not blinking.
NOTE: The printer does not support encrypted memory devices.
For more information on the supported memory devices, see Memory device
specifications.
To insert a memory card
1.
Turn the memory card so that the label faces up.
2. Insert the memory card into the memory card slot on the left side of the printer
until it snaps into place.
TIP: To remove a memory card, push in the card and then release it.
To connect a storage device
▲
Insert the USB storage device or the other end of the camera’s USB cable to the
USB port at the back of the printer.
Insert a memory device 27