HP XP for Compatible Extended Remote Copy Software Licenses - Manual (Page 25)

operation mode setting of Compatible XRC in the Change Option dialog box (see
Figure 13 on page 33).
Table 7 HP Compatible XRC in Conventional Models and XP24000/XP20000 Disk Arrays
Option Settings of XRC in
XP24000/XP20000 Disk Array
storage systems
Operation Modes of HP Compatible XRC in
Conventional Model
118 98 97 86 85 61 45
• Block Option: Cache Level
• Do not Block (Volume Level): Disable
• Level 1 Sleep: Enable
— — — — — Off Off
• Block Option: Cache Level
• Do not Block (Volume Level): Enable
• Level 1 Sleep: Enable (see Note)
— — — — — On Off
• Block Option: Cache Level
• Do not Block (Volume Level): Disable
• Level 1 Sleep: Disable
— — — — — Off On
• Block Option: Volume Level
• Do not Block (Volume Level): Enable
• Level 1 Sleep: Disable
— — — — — On On
Level 2 Threshold: 50% — — — Off Off — —
Level 2 Threshold: 60% — — — On Off — —
Level 2 Threshold: 40% — — — Off On — —
Level 2 Threshold: 70% — — — On On — —
Sleep Time: 100 ms — — Off — — — —
Sleep Time: 10 ms — — On — — — —
Level 2 Suspend: Disable — Off — — — — —
Level 2 Suspend: Enable — On — — — — —
Level 1 SIM: Disable Off — — — — — —
Level 1 SIM: Enable On — — — — — —
Note : Level 1 Sleep is performed on a volume in which a threshold specified by SDM is
enabled (Block option). Level 1 Sleep is not performed on the volume for which Do not Block
(Volume Level) is specified.
• The behavior of the XP24000/XP20000 Disk Array storage systems, that are affected by
option settings in the Change Option dialog box ( Figure 13 on page 33), is also affected by
XP24000/XP20000 for Compatible Extended Remote Copy (XRC) Software User's Guide 25