Economy settings, Print with economode, Powersave modes – HP LaserJet Pro 400 color Printer M451 series User Manual
Page 143: Set sleep delay, Set the auto power down delay, Print with economode powersave modes, Set sleep delay set the auto power down delay
Economy settings
Print with EconoMode
EconoMode uses less toner, which might extend the life of the print cartridge.
HP does not recommend the full-time use of EconoMode. If EconoMode is used full-time, the toner
supply might outlast the mechanical parts in the print cartridge. If print quality begins to degrade and
is no longer acceptable, consider replacing the print cartridge.
1.
On the File menu in the software program, click Print.
2.
Select the product, and then click the Properties or Preferences button.
3.
Click the Paper/Quality tab.
4.
Click the EconoMode check box.
Powersave modes
The adjustable sleep mode feature reduces power consumption when the product has been inactive
for an extended period. You can set the length of time before the product enters sleep mode.
NOTE:
This mode does not affect product warm-up time.
Set sleep delay
1.
At the control panel, press the
OK
button to open the menus.
2.
Open the following menus:
●
System Setup
●
Energy Settings
●
Sleep Delay
3.
Select the time for the delay, and then press the
OK
button.
NOTE:
The default value is 15 minutes.
Set the Auto Power Down delay
1.
At the control panel, press the
OK
button to open the menus.
2.
Open the following menus:
●
System Setup
●
Energy Settings
ENWW
Economy settings
125