HP Unified Extensible Firmware Interface - Manual (Page 7)

Action Key
Press during server POST or system reboot to display the System
Utilities screen in the iLO 4 Remote Console. F9
Press during server POST to boot to the One-Time Boot Menu screen. F11
4. To exit the System Utilities screen and restart the server, press Esc until the main menu is
displayed. Exit the utility by selecting Exit and Resume Boot in the main menu.
Before booting to the UEFI Shell
Before booting to the UEFI Shell, follow these steps::
•
Ensure the embedded UEFI Shell is enabled (default is enabled). See “Enabling the Embedded
UEFI Shell” (page 8) .
Once the UEFI Shell is selected as the boot mode and enabled, you can:
1.
Optionally, add the Embedded UEFI Shell to the boot order list. For more information, see
“Adding Embedded UEFI Shell to the boot order list” (page 8) .
2. Change the Embedded UEFI Shell entry in the UEFI Boot order list. For more information, see
“Changing the UEFI boot order” (page 9) .
Selecting the UEFI Mode
By default, the HP ProLiant boots in Legacy BIOS Boot Mode.
To change the boot mode to UEFI in the System Utilities, perform the following steps:
1.
From the System Utilities screen, select System Configuration
→BIOS/Platform Configuration
(RBSU)
→Boot Options→Boot Mode and press Enter.
2. Select UEFI Mode to configure the system to boot to a UEFI compatible operating system.
3. Press F10 to save your selection.
4. From the System Utilities screen, select Exit and Resume Boot.
5. Reboot the server for the change to take effect.
Figure 2 Boot Options — Boot Mode screen
Accessing the UEFI Shell 7