Changing the uefi boot order – HP Unified Extensible Firmware Interface User Manual
Page 9
To add the Embedded UEFI Shell to the boot order list:
1.
From the System Utilities screen, select System Configuration
→BIOS/Platform Configuration
(RBSU)
→System Options→UEFI Shell Options→Add Embedded UEFI Shell to Boot Order and
press Enter.
2.
Select one of the following options:
•
Enabled (default)—Adds the embedded UEFI Shell to the boot order.
•
Disabled
3.
Press F10 to save your selection.
Figure 4 UEFI Shell Options — Add Embedded UEFI Shell to the Boot Order screen
Changing the UEFI boot order
To change the order of the UEFI boot list:
1.
From the System Utilities screen, select System Configuration
→BIOS/Platform Configuration
(RBSU)
→Boot Options→UEFI Boot Order and press Enter. The UEFI Boot Order screen appears.
2.
Select Enter to open the Boot Order list.
3.
Use the arrow keys to navigate within the boot order list.
4.
Press the + key (plus) to move an entry higher in the boot list.
5.
Press the - key (minus) to move an entry lower in the list.
6.
Press F10 to save your selection.
7.
From the System Utilities screen, select Exit and Resume Boot.
8.
Reboot the server for the change to take effect.
Accessing the UEFI Shell
9