HP Unified Extensible Firmware Interface - Manual (Page 14)

Controlling command output
Many UEFI Shell commands support optional parameters for controlling how the output displays
on the screen. The following sections explain these options and provides examples on how to use
them.
Limiting output to one screen at a time
Use the –b option to limit the display output of certain commands to one screen at a time. Shell
commands supporting this option include:
•
comp
•
devices
•
devtree
•
dh
•
dmem
•
help
•
memmap
Example 2 (page 15) shows how to limit devtree output to one screen at a time. After displaying
the first screen, the Shell prompts for either of the following:
•
Press Enter to continue to the next screen.
•
Press Q to quit the display.
14 UEFI Shell command reference