HP Photosmart C5580 All-in-One Printer - Manual (Page 147)

Printouts seem blurry or fuzzy
Try the following solutions if your printout is not sharp or unclear.
TIP: After reviewing the solutions in this section, you can go to HP's Web site to see
if there is additional troubleshooting help. For more information, go to: www.hp.com/
support .
• Solution 1: Check the print settings
• Solution 2: Use a higher quality image
• Solution 3: Print the image in a smaller size
Solution 1: Check the print settings
Solution: Check the print settings.
• Check the paper type setting to make sure it matches the type of paper loaded in
the input tray.
• Check the quality setting. Use a higher quality setting to increase the amount of
ink used for printing.
For more information, see:
• “Set the paper type for printing” on page 53
• “Change the print speed or quality” on page 54
• “Print using Maximum dpi” on page 60
• “Change copy speed or quality” on page 88
Cause: The paper type or print quality settings were set incorrectly.
If this did not solve the issue, try the next solution.
Solution 2: Use a higher quality image
Solution: Use a higher resolution image.
If you are printing a photo or graphic,and the resolution is too low, it will be blurry or
fuzzy when printed.
If a digital photo or rasterized graphic has been resized, it can be blurry or fuzzy when
printed.
Cause: The resolution of the image was low.
If this did not solve the issue, try the next solution.
Solution 3: Print the image in a smaller size
Solution: Reduce the size of the image and then print it.
If you are printing a photo or graphic, and the print size is set too high, it will be blurry
or fuzzy when printed.
If a digital photo or rasterized graphic has been resized, it can be blurry or fuzzy when
printed.
Chapter 14
144 Troubleshooting
T
roub
les
hoot
ing