HP Netserver L Server series - Manual (Page 44)

Chapter 6 Installing Mass Storage Devices
38
Figure 6-2. Removing a Mass Storage Filler Panel
2. Drive spacers attach to the disk drive module with four small feet. If you
need to remove a drive spacer from the adjacent disk drive module,
remove it as follows:
•
Slide the drive spacer back, a fraction of an inch away from your body.
•
Tilt up the front of the drive spacer to disengage the front two feet.
•
Pull the drive spacer forward slightly to disengage the back two feet
and lift (see Figure 6-3).