HP Netserver L Server series - Manual (Page 60)

Chapter 8 Installing the NetServer in an HP Rack System/E or Rack System/U
54
Installing the NetServer
The following steps require lifting the NetServer and securing it to the slides
installed in the rack.
WARNING Extend the anti-tip foot from the front of the rack and lower
all leveler feet to stabilize the rack before mounting rack
components. Failure to use the anti-tip foot and leveler feet
could result in serious injury.
1. Lower the four rack leveler feet to the floor, lifting the rack off the rack
wheels (see Figure 8-8).
2. Fully extend the anti-tip foot from the front of the rack.
Figure 8-8. Preparing the Rack for NetServer Installation