HP e-CommerceXML Accelerator sa7150 - Manual (Page 106)

C H A P T E R 5 HP e-Commerce/XML Server Accelerator SA7150 User Guide
96
set ssh Enable or disable Secure Shell (SSH) sessions. When this
command is set to “enable” and an IP address is assigned to the
SA7150’s network interface, you can access the device’s CLI via
remote SSH session. When disabled, the device refuses SSH
connections. Default: disable.
Syntax:
HP SA7150> set ssh <enable|disable>
show ssh Display current SSH status: enabled or disabled.
Example:
HP SA7150> show ssh
SSH: Disabled
set ssh_port Set the port on which SSH connections are accepted. (Default port:
22.)
Syntax:
HP SA7150> set ssh_port <port>
where <port> is the number of the port to which SSH sessions
will connect.
show ssh_port Display port on which SSH sessions are currently accepted.
Example:
HP SA7150> show ssh_port
SSH Port Number: 22 .
setsnmp snmp Enable or disable the SNMP agent. When enabled, you can
configure SNMP information and parameters (see setsnmp
snmp_info) for the SA7150. Default: disable.
Syntax:
HP SA7150> setsnmp snmp <enable|disable>
Command Description