HP e-CommerceXML Accelerator sa7150 - Manual (Page 137)

C H A P T E R 6 SNMP
127
You can also configure SNMP information elements individually
using the following commands:
• setsnmp snmp_port sets the SNMP port
• setsnmp trap_port sets the SNMP trap port
• setsnmp sys_contact sets the contact person
• setsnmp sys_name sets the system name
• setsnmp sys_location sets the system location
Correspondingly, the values set with the above commands are
displayed using the commands:
• showsnmp snmp_port
• showsnmp trap_port
• showsnmp sys_contact
• showsnmp sys_name
• showsnmp sys_location.
Community String
Use CLI commands setsnmp snmp_community, list
snmp_community and delete snmp_community to set, list, and
delete SNMP community strings.
HP SA7150> setsnmp snmp_community
SNMP Community String(s) Setting.
Enter a SNMP Community IP (q to quit): 1.1.1.1
Enter a SNMP Community String (q to quit): cstring
Enter a SNMP Community IP (q to quit): q
HP SA7150> list snmp_community
SNMP Community String(s) information.
<1> Current SNMP Community String(s):
1.) IP: 1.1.1.1 => String: cstring => Rights: read
HP SA7150> delete snmp_community
SNMP Community String(s) Deletion.
<1> Current Available SNMP Community String(s):
1.) IP: 1.1.1.1 => String: cstring => Rights: read
Enter number (1) to delete (q to quit) [1]: 1
Enter number (1) to delete (q to quit) [1]: q