HP e-CommerceXML Accelerator sa7150 - Manual (Page 110)

C H A P T E R 5 HP e-Commerce/XML Server Accelerator SA7150 User Guide
100
Alarms and
Monitoring
Commands
Command Description
set alarms Enable all or a selection of the SA7150’s alarms.
Syntax:
HP SA7150> set alarms <all esc nls none ovl rsc
utl>
where
<all> enables all five of the SA7150’s alarms
<esc> enables the Encryption Status Change Alarm
<nls> enables the Network Link Status Alarm
<none> disables all alarms
<ovl> enables the Overload Alarm
<rsc> enables the Refused SSL Connection Alarm
<utl> enables the Utilization Threshold Alarm
Example:
HP SA7150> set alarms all
HP SA7150> show alarms
Alarms set: esc rsc utl ovl nls
show alarms Display the list of currently enabled alarms.
Example:
HP SA7150> set alarms none
HP SA7150> show alarms
Alarms set:
NOTE: When no alarms are set (i.e., when none is specified in set
alarms), the display shows an empty field.
set rsc_window Set interval (window) at which the device checks for refused SSL
connections and, if any are detected, issues an RSC Alarm.
(Range: 5-65000 seconds, default: 15)
Syntax:
HP SA7150> set rsc_window <sec>
where <sec> is the number of seconds of the desired interval.