HP StorageWorks XP Remote Web Console Software - Manual (Page 28)

28 Requirements and overview of copy operations
• Start RAID Manager XP, and check the connection configuration as follows:
3. Edit the configuration definition file.
Edit the configuration definition file using the TID# and LU#, which is obtained by executing the
raidscan
command as follows:
horcm0.conf
# horcmstart.sh 0
starting HORCM inst 0
HORCM inst 0 starts successfully.
# HORCMINST=0
# export HORCMINST
# HORCC_MRCF=1
# export HORCC_MRCF
# raidscan -p CL1-A -CLI
PORT# /ALPA/C TID# LU# Seq# Num LDEV# P/S Status P-Seq# P-LDEV#
CL1-A b2 2 0 0 0 60000 1 10 SMPL - - -
CL1-A b2 2 0 0 1 60000 1 10 SMPL - - -
CL1-A b2 2 0 0 2 60000 1 10 SMPL - - -
# raidscan -p CL1-B -CLI -fe
PORT# /ALPA/C TID# LU# Seq# Num LDEV# P/S Status E-Seq# E-LDEV#
CL1-B b2 2 0 0 0 60000 1 11 SMPL - 30000 12
CL1-B b2 2 0 0 1 60000 1 11 SMPL - 30000 12
CL1-B b2 2 0 0 2 60000 1 11 SMPL - 30000 12
# horcmshutdown.sh 0
inst 0:
HORCM Shutdown inst 0 !!!
HORCM_MON
#ip_address service poll(10ms) timeout(10ms)
127.0.0.1 52050 1000 3000
HORCM_CMD
#dev_name dev_name dev_name
/dev/rdsk/c1t2d3
HORCM_DEV
#dev_group dev_name port# TargetID LU# MU#
hicp hicpdev1 CL1-A 0 0 0
HORCM_INST
#dev_group ip_address service
hicp 127.0.0.1 52051