HP XP Racks - Manual (Page 43)

Table 12 Configuration (HORCM_CONF) parameters (continued)
Limit Type Default Parameter
31 characters Character string None dev_name for
HORCM_DEV
31 characters Character string None dev_group
Recommended value = 8 char.
or less
31 characters Character string None port #
7 characters Numeric value* None target ID
7 characters Numeric value* None LU#
7 characters Numeric value* 0 MU#
12 characters Numeric value* None Serial#
6 characters Numeric value None CU:LDEV(LDEV#)
63 characters Character string None dev_name for
HORCM_CMD
Recommended value = 8 char.
or less
*Use decimal notation (not hexadecimal) for numeric values.
Do not edit the configuration definition file while RAID Manager is running. Shut down RAID
Manager, edit the configuration file as needed, and then restart RAID Manager.
Do not mix pairs created with the "pair splitting with specifying the consistency group" option (-m
grp) and pairs created without this option in the same group defined in the RAID Manager
configuration file. If you do, a pairsplit operation might end abnormally, or S-VOLs of the P-VOLs
in the same consistency group (CTG) might not be created correctly at the time the pairsplit request
is received.
Creating/editing the configuration definition file 43