Step 4: install the auto-duplex unit – HP Color Inkjet cp1700 Printer series User Manual
Page 12
Advertising
2-6
ENWW
3
Set the printer on top of Tray 2.
Step 4: Install the auto-duplex unit
To install the auto-duplex unit, you must first remove the pre-installed
rear access panel. The rear manual feed is not available when you
install the auto-duplex unit.
1
At the back of the printer, push the buttons on both sides of the rear
access panel, and pull out the rear access panel.
EulerUG.book Page 6 Monday, July 16, 2001 5:34 PM
Advertising