HP Color Inkjet cp1700 Printer series - Manual (Page 72)

ENWW B-3
LOAD [MEDIA SIZE]
MEDIA IN [TRAY] PRESS
RESUME TO CONTINUE For a print job that
automatically selects the
media type, the printer
requires media of the specified
size to be loaded into the
specified paper tray. Follow the instructions in the
printer message.
PRINTED PAGE IS
DRYING... PRESS
RESUME TO CONTINUE Printer has paused printing to
let the current page dry. Wait for the printer to
automatically resume printing
after the drying period. If you
want the printer to resume
printing immediately, hold the
current page and press the
RESUME button. When the
printer releases the current
page, remove it from the
output tray and place it
elsewhere to dry. This
prevents the printed pages
from smudging each other.
CLOSE ALL COVERS One or more covers on the
printer are open. Close any open covers.
REAR MANUAL FEED NOT
AVAILABLE...
JOB CANCELLED Check to see if the auto-
duplex unit is installed. If the auto-duplex unit is
installed, you must remove it
and reinstall the rear access
panel to print from the rear
manual feed. If the rear
access panel is installed,
check to make sure it is
installed correctly in the
printer.
TRAY 2 NOT AVAILABLE
PRESS RESUME OR
CANCEL Tray 2 is an optional
accessory. If you have not
purchased Tray 2, you cannot
print from it. If you have purchased Tray 2,
make sure it is installed
correctly in the printer.
Otherwise, press the
RESUME button to continue
the job using Tray 1, or press
the
CANCEL button to cancel
the job.
Message Explanation Recommended Action
EulerUG.book Page 3 Monday, July 16, 2001 5:34 PM