HP Color Inkjet cp1700 Printer series - Manual (Page 53)

ENWW 8-5
Move closer to the printer
l Make sure the device is no more than three feet (one meter) from
the printer when you send the print job.
If you are still having problems sending a job to print using the
infrared feature, consult the infrared documentation for the
handheld or laptop device.
Something on the page is missing or incorrect
Check the margin settings
l Make sure the margin settings for the document do not exceed the
printable area of your printer.
For information about margin settings, see “Minimum margins.”
Check the color print settings
l Grayscale might be selected in the Print Settings dialog box.
Placement of the text or graphics is wrong
Check the page-orientation setting
l The page orientation selected might not be correct for the
document you are printing. Make sure the media size and page
orientation selected in the software program match the settings in
the Print Settings dialog box.
For instructions about changing print settings, see “Printer
settings.”
Check the paper size
l The Paper Size setting might not match the size of media you are
using. Select the correct paper size from the printer driver.
l The size of the document you are printing might be larger than the
media in the tray, so that content is cut off because it is outside the
printable area.
If the layout of the document you are trying to print will fit on a
media size supported by the printer, then load the correct media
size. Make sure to select the correct page orientation.
Alternatively, select Emulate LaserJet Margins in the printer driver
to scale the document to fit the media size currently selected.
EulerUG.book Page 5 Monday, July 16, 2001 5:34 PM