HP Color Inkjet cp1700 Printer series User Manual
Page 15
ENWW
2-9
3
Lift and push the printhead access latch toward the back of the
printer.
4
Remove each printhead from its package. Remove the protective
film from each printhead.
5
Insert each printhead into its own color-coded socket.
6
Press firmly on each printhead to ensure proper contact after
installation.
7
Lift the printhead access latch and bring it forward. Hook the
carriage lock to the latch and then push the latch backwards until it
is in its original position. You will have to use some force to close
the printhead access latch. If the printhead access latch will not
close, ensure that the printheads are seated properly by pushing
down firmly on each printhead.
8
Close the printhead cover and the ink cartridge cover.
The color sequence of the printheads does not correspond to the color
sequence of the ink cartridges.
EulerUG.book Page 9 Monday, July 16, 2001 5:34 PM