HP XP Continuous Access Software - Manual (Page 106)

106 HP StorageWorks Disk Array XP RAID Manager: User’s Guide
General commands
RM Command Description UNIX
Windows
NT/2000
/2003 MPE/iX Page
horcctl Changes and displays the RM internal
trace and control parameters.
• • • 109
horcmshutdown Stops RM. • • • 112
horcmstart A shell script that starts RAID Manager. • • • 113
horctakeover (CA sync/async only) The host executing
horctakeover takes ownership of a pair.
• • • 114
inqraid Displays array information. • • 118
mkconf Makes a configuration file. • • • 131
paircreate Creates a pair. • • • 134
paircurchk (CA sync/async only) Checks the
consistency of the data on the secondary
volume. • • • 142
pairdisplay Confirms the configuration of a specified
pair.
• • • 145
pairevtwait Event waiting command. • • • 156
pairmon Monitors a pair and reports changes in
the pair status.
• • • 162
pairresync Resynchronizes a pair. • • • 165
pairsplit Splits or suspends a pair. • • • 173
pairsyncwait Synchronization waiting command. • • • 179
pairvolchk Checks the attributes of a volume
connected to the local or remote hosts.
• • • 186
raidar Reports the I/O activity of a specified
LDEV.
• • • 197
raidqry Confirms the connection of the disk array
and the open system host.
• • • 200
raidscan Lists the Fibre Channel port, target ID,
LUN, and LDEV status.
• • • 202