Document Outline

• HP ProLiant ML570 Generation 4 Server User Guide
• Notice
• Contents
• Component identification
  • Front panel components
  • Front panel LEDs and buttons
  • Rear panel components
  • Rear panel LEDs and buttons
  • System board components
    • System maintenance switches
    • NMI switch
  • System LEDs and internal health LED combinations
  • System board LEDs and Systems Insight Display codes
  • SAS and SATA device numbers
  • SAS and SATA hard drive LEDs
  • SAS and SATA hard drive LED combinations
  • Memory board LEDs and components
  • DIMM slots
  • Hot-plug power supply LEDs
  • Hot-plug fans
  • Hot-plug fan LEDs
• Operations
  • Power up the server
  • Power down the server
  • Extend the server from the rack
  • Unlock and remove the tower bezel
  • Remove the rack bezel
  • Remove the access panel
  • Install the access panel
• Setup
  • Optional installation services
  • Rack planning resources
  • Optimum environment
    • Space and airflow requirements
    • Temperature requirements
    • Power requirements
    • Electrical grounding requirements
  • Rack warnings and cautions
  • Identifying tower server shipping carton contents
  • Identifying rack server shipping carton contents
  • Installing hardware options
  • Setting up a tower server
  • Installing the server into the rack
  • Powering up and configuring the server
  • Installing the operating system
  • Registering the server
• Hardware options installation
  • Processor option
  • Memory options
    • General memory configuration requirements
      • Single- and Dual-rank DIMMs
      • Advanced ECC Memory
      • Online spare memory
      • Hot-plug mirrored memory
      • Hot-plug RAID memory
    • Memory boards and DIMMs
      • Removing and installing a memory board (hot-plug)
      • Removing and installing a memory board (non-hot-plug)
    • Configuring the memory
      • POST memory test
      • ROM-based diagnostics
      • Selecting the AMP mode
  • Hot-plug SAS and SATA hard drive option
    • Installing a hot-plug SAS or SATA hard drive
    • Removing a hot-plug SAS hard drive
  • Drive options
    • Optical drives
    • Removable media devices
      • Removing the tape drive blank
      • Installing a tape drive
  • Redundant hot-plug power supply option
  • Redundant hot-plug fans
    • Installing hot-plug fans
    • Replacing hot-plug fans
  • Expansion board options
    • Removing an expansion slot cover
    • Installing expansion boards
  • Tower-to-rack conversion
    • Removing the casters
    • Removing the tower cover
    • Installing the rack bezel
  • Rack-to-tower conversion
    • Removing the cable management arm
    • Removing the server from the rack
    • Removing the server rails
    • Installing the tower cover
    • Installing the casters
    • Installing the tower bezel
• Cabling
  • Storage device cabling guidelines
  • Tape drive cabling to the USB connector
  • SAS cabling
  • Video connector cabling
  • Battery-backed write cache cabling
• Software and configuration utilities
  • Configuration tools
    • SmartStart software
      • SmartStart Scripting Toolkit
    • HP ROM-Based Setup Utility
      • Boot options
      • BIOS Serial Console
      • Configuring memory
    • Array Configuration Utility
    • HP ProLiant Essentials Rapid Deployment Pack
    • Re-entering the server serial number and product ID
  • Management tools
    • Automatic Server Recovery
    • ROMPaq utility
    • Integrated Lights-Out 2 technology
    • StorageWorks library and tape tools
    • HP Systems Insight Manager
    • Management Agents
    • Redundant ROM support
      • Safety and security benefits
    • USB support
  • Diagnostic tools
    • HP Insight Diagnostics
    • Integrated Management Log
    • Array Diagnostic Utility
  • Remote support and analysis tools
    • HP Instant Support Enterprise Edition
  • Keeping the system current
    • Drivers
    • ProLiant Support Packs
    • Operating system version support
    • System Online ROM Flash Component Utility
    • Change control and proactive notification
    • Natural language search assistant
    • Care Pack
• Troubleshooting
  • Troubleshooting resources
  • Pre-diagnostic steps
    • Important safety information
      • Symbols on equipment
      • Warnings and cautions
    • Symptom information
    • Prepare the server for diagnosis
  • Loose connections
  • Service notifications
  • Troubleshooting flowcharts
    • Start diagnosis flowchart
    • General diagnosis flowchart
    • Server power-on problems flowchart
    • POST problems flowchart
    • OS boot problems flowchart
    • Server fault indications flowchart
  • POST error messages and beep codes
• Electrostatic discharge
  • Preventing electrostatic discharge
  • Grounding methods to prevent electrostatic discharge
• Regulatory compliance notices
  • Regulatory compliance identification numbers
  • Federal Communications Commission notice
    • FCC rating label
    • Class A equipment
    • Class B equipment
  • Declaration of conformity for products marked with the FCC logo, United States only
  • Modifications
  • Cables
  • Canadian notice (Avis Canadien)
  • European Union regulatory notice
  • Disposal of waste equipment by users in private households in the European Union
  • Japanese notice
  • BSMI notice
  • Korean notice
  • Laser compliance
  • Battery replacement notice
  • Taiwan battery recycling notice
  • Power cord statement for Japan
• Specifications
  • Server specifications
  • Environmental specifications
• Technical support
  • Before you contact HP
  • HP contact information
  • Customer self repair
• Acronyms and abbreviations
• Index