Front video adapter option – HP ProLiant DL360p Gen8 Server User Manual
Page 58
Hardware options installation 58
CAUTION:
When connecting or disconnecting the capacitor pack cable, the connectors on the
cache module and cable are susceptible to damage. Avoid excessive force and use caution to
avoid damage to these connectors.
7.
Install the FBWC capacitor pack, and then connect the FBWC cable to the cache module.
The second (left) capacitor pack cable connects to an optional Smart Array expansion board.
8.
Install the PCI riser cage (on page
9.
Install the access panel (on page
10.
Slide the server into the rack.
11.
Connect each power cord to the server.
12.
Connect each power cord to the power source.
13.
Front video adapter option
Depending on the model purchased, the server may look different than shown.
The 10 SFF drive configuration does not support the front video adapter.
To install the component:
1.
Connect the front video adapter to the front video connector.
CAUTION:
Be sure to connect the video adapter to the video connector, and not to the USB
connector.