HP Netserver L Server series - Manual (Page 144)

Chapter 16 Regulatory Information
136
DECLARATION OF CONFORMITY
per ISO/IEC Guide 22 and EN 45014
Manufacturer ' s Name: Hewlett-Packard Company
Manufacturer
'
s Address: 5301 Stevens Creek Blvd.
Santa Clara, CA 95052 USA
declares, that the product
Product Name: Network Server
Model(s): LH 3 and LH 3r
Product Options: All
conforms to the following Product Specifications:
Safety: IEC 950:1991 + A1+ A2 + A3 / EN 60950:1992 + A1+ A2 + A3
EMC: CISPR 22:1993 / EN 55022 (1994)
EN 50081-1:1992 - Generic Emission
EN 50082-1:1992 - Generic Immunity
IEC 801-2:1991, 4 kV CD, 8 kV AD
IEC 801-3:1984, 3V/m
IEC 801-4:1988, 0.5 kV Signal Lines, 1 kV Power Lines
FCC Title 47 CFR, Part 15
Supplementary Information:
1) The product was tested in a typical configuration with Hewlett-Packard peripherals.
2) Models were configured with a network interface board and shielded twisted-pair cable.
3) The product complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
• This device may not cause harmful interference, and
•
This device must accept any interference received, including interference that may cause
undesired operation
The product herewith complies with the requirements of the following directives and carries the CE-marking accordingly:
-EMC Directive 89/336/EEC
-Low Voltage Directive 73/23/EEC
Santa Clara, April 6, 1998
Nigel Marrion / Quality Manager
North American Contact:
Hewlett-Packard Company Product Regulations Manager
3000 Hanover Street
Palo Alto, CA 94304
650-857-1501
European Contact: Your local Hewlett-Packard Sales and Service Office or
Hewlett-Packard GmbH,
Department HQ-TRE
Herrenberger Straße 130
D-71034 Böblingen
(FAX: + 49-7031-143143)