HP Netserver L Server series - Manual (Page 84)

Chapter 10 Configuring the NetServer
76
During system start-up or reset, when the message
Press <Ctrl> <C> to start Symbios Configuration
Utility
appears, press the CTRL and C keys at the same time.
Use the arrow keys to move the cursor, press ENTER to select an option, and
press ESC to exit.
1. To change adapter settings:
•
Select an adapter from the list in the Main Menu
•
Select "Adapter Setup". This option configures the SCSI ID setting
and other advanced adapter settings.
2. To format a hard disk or change hard disk parameters:
•
Select an adapter from the list in the Main Menu
•
Select "Device Selections"
•
Select the hard disk to format
•
Select "format" menu option
For more details, including default settings, refer to Information Assistant on the
HP NetServer Online Documentation CD-ROM.
ISA Non-Plug-and-Play Boards (Optional)
Reserving Resources for ISA Non-Plug-and-Play Boards
If you have installed an ISA non-Plug-and Play accessory board, you must
reserve system resources for it. Turn on the monitor and the NetServer, and start
the Setup utility by pressing the F2 key when
Press <F2> to enter SETUP
appears on the boot screen.