HP Insight Cluster Management Utility - Manual (Page 113)

Figure 45 Verify AMS submenu
There are three components to the HP Insight CMU AMS with the HP iLO:
1. Configuring the iLO on each server with a public SNMP read-only port and enabling AMS.
2. Requesting and displaying a full data report of all available HP iLO data.
3. Configuring HP iLO SNMP data as metrics to be monitored by HP Insight CMU.
NOTE: You must configure the HP iLO with AMS to get the data report and configure the
monitoring.
6.5.9.1.1 Configuring the HP iLO SNMP port
To configure the HP iLO SNMP port and enable AMS, select the servers in the HP Insight CMU
GUI (on the left side) and right-click to bring up the remote management menu. Then select
AMS
→Configure iLO:
Figure 46 Configure iLO SNMP port
When this command completes, a summary displays which iLOs are successfully configured:
6.5 Customizing HP Insight CMU monitoring, alerting, and reactions 113