3 dl160 g6 servers, 4 sl2x170z g6 and dl170h g6 servers bios setting, Nic2 on the sl2x170z g6 server – HP Insight Cluster Management Utility User Manual
Page 18
Advertising
![background image](/manuals/398647/18/background.png)
◦
Terminal VT100
•
Boot Configuration
Boot Order
◦
1.
Embedded NIC
2.
Disk or smart array
◦
Embedded NIC1 Enabled
2.1.8.3 DL160 G6 Servers
•
IPMI
Serial Port assigned to System
◦
◦
Serial Port Connection Mode Direct
•
PCI
NIC1 control Enabled
◦
◦
NIC1 PXE Enabled
•
SATA
SATA#1 Controller Mode AHCI
◦
•
Boot Configuration
Boot Order
◦
1.
NIC
2.
CD
3.
Disk
2.1.8.4 SL2x170z G6 and DL170h G6 Servers BIOS setting
IMPORTANT:
To enable BIOS updates, you must restart the server. You can restart the server
with Ctrl+Alt+Delete immediately after leaving the BIOS, or you can physically restart the server
by using the power switch on the server.
Figure 3 NIC2 on the SL2x170z G6 Server
•
BIOS settings
Post speedup Enabled
◦
18
Installing and upgrading HP Insight CMU
Advertising