HP Officejet Pro 8000 - A809 - Manual (Page 22)

Photo media
•
Use the Best mode to print photographs. Note that in this mode, printing takes
longer and more memory is required from your computer.
• Remove each sheet as it prints and set it aside to dry. Allowing wet media to stack
up may cause smearing.
Transparencies
•
Insert transparencies with the rough side down and the adhesive strip pointing
towards the back of the device.
• Remove each sheet as it prints and set it aside to dry. Allowing wet media to stack
up may cause smearing.
Custom-sized media
•
Use only custom-sized media that is supported by the device.
• If your application supports custom-sized media, set the media size in the
application before printing the document. If not, set the size in the printer driver.
You might need to reformat existing documents to print them correctly on custom-
sized media.
Understand specifications for supported media
Use the Understand supported sizes and Understand supported media types and
weights tables to determine the correct media to use with your device, and determine
what features will work with your media.
Always use the correct media-type settings in the printer driver, and configure the trays
for the correct media type. HP recommends testing any paper before buying it in large
quantities.
• Understand supported sizes
• Understand supported media types and weights
Understand supported sizes
NOTE: Tray 2 is sold as an accessory. For ordering information, see Accessories .
Media size Tray 1 Tray 2 Duplexer
Standard media sizes
U.S. Letter (216 x 279 mm; 8.5 x 11 inches)
8.5 x 13 inches (216 x 330 mm)
U.S. Legal (216 x 356 mm; 8.5 x 14 inches)
A4 (210 x 297 mm; 8.3 x 11.7 inches)
U.S. Executive (184 x 267 mm; 7.25 x
10.5 inches)
Chapter 3
18 Use the device