HP Officejet Pro 8000 - A809 User Manual
Page 45
1. Printer Information: Shows device information (such as the product name, model
number, serial number, and firmware version number), the accessories that are
installed (such as the duplexer), and the number of pages printed from the trays
and accessories.
2. Ink Cartridge Status: Shows the estimated ink levels (represented in graphical
form as gauges) and the part numbers and expiration dates of the ink cartridges.
NOTE: Ink level warnings and indicators provide estimates for planning
purposes only. When you receive a low-ink warning message, consider having
a replacement cartridge available to avoid possible printing delays. You do not
need to replace cartridges until prompted to do so.
3. Printhead Status: Shows the status of the printhead health and the part numbers,
first-installation dates, and end-of-warranty dates of the printheads, as well as the
accumulated ink usage. The status options for the printhead are: good, fair, and
replace. If the status is fair, then the print quality must be monitored, but the
printhead does not need to replaced. If the status is replace, then the printhead
should be replaced, as the device will not function until it is.
To print the self-test diagnostic page
•
Control panel: Press and hold the
Cancel button for 3 seconds.
NOTE: For models that are connected to a network, the network configuration
or wireless (some models only) configuration page will also be printed.
•
HP Toolbox (Windows): Click the Services tab, and then click Print Self-Test
Diagnostic Page.
•
HP Printer Utility (Mac OS X): Click Device Information from the Information
and Support panel, and then click Print Configuration Page.
•
Embedded Web Server: Click Settings, click Device Services, select Self-Test
Report from the drop-down menu in the Reports section, and then click Print.
Understand the network configuration or wireless (some
models only) status report
The network configuration or wireless (some models only) status report shows the
network or wireless settings for the device.
NOTE: The network configuration or wireless status report is printed when you
print a self-test report. For more information, see
.
Understand the network configuration or wireless (some models only) status report
41