Installing an expansion board, Installing an, Expansion board – HP ProLiant DL360 G4p Server User Manual
Page 59
Advertising
Hardware Options Installation
59
5. Remove the expansion board.
Installing an Expansion Board
1. Power down the server ("Powering Down the Server" on page
2. Extend the server from the rack, if applicable ("Extending the Server from
the Rack" on page
3. Remove the access panel ("Removing the Access Panel" on page
4. Remove the PCI riser board assembly.
5. Remove the expansion slot cover from the PCI riser board assembly.
6. Align the expansion board with the guiding groove.
7. Press to release the expansion board retainer clip.
Advertising