HP Compaq StorageWorks TL881 DLT Mini-Library - Manual (Page 117)

4-2 Compaq TL881 Minilibrary System Users Guide
display. Figure 4-1 shows a typical Default Screen. Yours may vary depending
on the number of drives in your library (second line), and the number and
locations of
cartridges in the magazine (fourth line).
SHR-1458
Figure 4-1. Default Screen
1. At the Default Screen, press the Enter button. The Main Menu shown in
Figure 4-2 appears:
SHR-1331
Figure 4-2. Main Menu
2. Press the button three times to move the to Configure Menu, then
press the Enter button. The display will show the Configure Submenu,
shown in Figure 4-3. The
at the end of the fourth line means that
there are additional configuration options that can be reached by
scrolling with the
button.
SHR-1332
Figure 4-3. Configure Submenu
To select a configuration option, press the or button on the
control panel until the on the display is next to the option you
want to change. In this case, let us choose Set Data Format. Press
the Enter button to display the choices for that option. If your
Base Module has two drives, the submenu shown in Figure 4-4
appears.